1 of 9 optimum technology matching? applied gaas hbt ingap hbt gaas mesfet sige bicmos si bicmos sige hbt gaas phemt si cmos si bjt gan hemt functional block diagram rf micro devices?, rfmd?, optimum technology matching?, enabling wireless connectivity?, powerstar?, polaris? total radio? and ultimateblue? are trademarks of rfmd, llc. bluetooth is a trade- mark owned by bluetooth sig, inc., u.s.a. and licensed for use by rfmd. all other trade names, trademarks and registered tradem arks are the property of their respective owners. ?2006, rf micro devices, inc. product description 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . ordering information bifet hbt ldmos ifbias vcc gnd nc nc nc ifn ifp 14 11 12 5 4 1 2 20 19 17 6 7 10 9 8 3 15 13 16 18 nc nc gnd gnd gnd nc gnd lo gnd gnd rfin nc rfmx1015 differential if down-converter 1500mhz to 2200mhz the rfmx1015 is a high linearity down-converter module designed for use in cellu- lar, 3g, lte, and other high performa nce communications systems. the rfmx1015 contains an integrated lo buffer amp and a passive mixer core with an amplified differential if output. the integrated lo bu ffer lowers the lo drive requirement to a friendly 0dbm typical. the rfmx1015 suppo rts both low and high-side lo injection for if frequencies up to 300mhz. the rfmx1015 also offers an adjustable ip3 range via the ifbias pin. users can lower the if amplifier dc current to save dc power when they don't require the device's peak linearity performance. features ? rf: 1500mhz to 2200mhz ? lo: 1400mhz to 2400mhz ? if: 50mhz to 300mhz ? operates both high and low- side lo ? conversion gain: 7.5db (if=50mhz) ? input ip3: 29dbm ? input p1db: 14dbm ? adjustable current and ip3 (via ifbias) ? single +5v supply applications ? cellular, 3g infrastructure ? wibro, wimax lte ? wireless backhaul ? high performance communications systems ? gmsk, qpsk, dqpsk, qam modulation ds100827 ? ? ? package: mcm, 20-pin, 5.2mmx5.2mm rfmx1015dif- ferential if down-con- verter 1500 mhz to 2200mhz rfmx1015sq sample bag with 25 pieces rfmx1015sr 7? reel with 100 pieces rfMX1015TR7 7? reel with 750 pieces rfmx1015tr13 13? reel with 2500 pieces rfmx1015pck-410 1500mhz to 2200mhz pcba with 5-piece sample bag
2 of 9 rfmx1015 ds100827 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . absolute maximum ratings parameter rating unit supply voltage (v cc )5.5v maximum rf input power 18 dbm maximum lo input power 10 dbm maximum power dissipation 1.5 w operating temperature range -40 to +85 c storage temperature range -40 to +150 c maximum junction temperature +150 c esd rating - human body model class 1a moisture sensitivity level msl 3 parameter specification unit condition min. typ. max. general performance conversion gain 6.5 7.0 8.5 db? f rf =1960mhz, f lo = 1810 mhz input third order intercept 29 dbm f rf1 =1960mhz, f rf2 =1961mhz, f lo =1810mhz, -5dbm/tone input 1db compression point 14 dbm f rf =1960mhz, f lo = 1810 mhz noise figure 14.5 db ssb nf, f rf =1960mhz, f lo =1910mhz lo leakage at rf port -22 dbm lo=0dbm lo leakage at if port -23 dbm lo=0dbm rf to if isolation 39 db lo=0dbm, p rf =0dbm 2rf to 2lo spurious response -63 dbc p rf =-10dbm 3rf to 3lo spurious response -70 dbc p rf =-10dbm rf interface frequency range 1500 2200 mhz input return loss 12 db if port terminated, lo=0dbm input impedance 50 lo interface frequency range 1400 2400 mhz lo input power -3 0 3 dbm return loss 15 db if port terminated impedance 50 if interface frequency range 50 300 mhz output return loss 15 db differential output impednace 200 power supply supply voltage (v cc ) 4.75 5 5.25 v supply current (i cc ) 175 200 240 ma sum of all currents. thermal resistance of lo amp 93 c/w based on lo amp current (pin 6) thermal resistance of if amp 88 c/w based on if amp current (pins 18 and 19) notes: 1. data shown for v cc =5.0v, lo power=0dbm, t=25c 2. all measurements performed with an rfmd if balun (p/n rfxf2553) on the evm. caution! esd sensitive device. exceeding any one or a combination of the absolute maximum rating conditions may cause permanent damage to the device. extended application of absolute maximum rating conditions to the device may reduce device reliability. specified typical perfor- mance or functional operation of the devi ce under absolute maximum rating condi- tions is not implied. rohs status based on eudirective2002/95/ec (at time of this document revision). the information in this publication is believed to be accurate and reliable. however, no responsibility is assumed by rf micro devices, inc. ("rfmd") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change component circuitry, recommended appli- cation circuitry and specifications at any time without prior notice.
3 of 9 rfmx1015 ds100827 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . for all graphs: typical performance - low side lo (f rf >f lo ), v cc =5.0v, p lo =0dbm, p rf =0dbm, f if =150mhz, unless otherwise noted. conversion gain vs. rf frequency 0 1 2 3 4 5 6 7 8 9 10 1.30 1.50 1.70 1.90 2.10 2.30 rf f reque ncy ( ghz) conversion gain (db) +25c -40c +85c conve rsion gain vs. if frequency (lo=1900mhz) 0 1 2 3 4 5 6 7 8 9 10 50 100 150 200 250 300 if frequency (mhz) conversion gain (db) +25c -40c +85c gain vs. lo power (rf=1950mhz, l0=1800 mhz) 0 1 2 3 4 5 6 7 8 9 10 -3 -2 -1 0 1 2 3 lo power (dbm) conversion gain (db) +25c -40c +85c inp ut ip3 vs. rf freq uency 20 22 24 26 28 30 32 34 1.30 1.50 1.70 1.90 2.10 2.30 rf frequency (ghz) input i p3 (dbm) +25c -40c +85c input ip3 vs. if frequency (rf=1950mhz) 20 22 24 26 28 30 32 34 50 100 150 200 250 300 if frequency (mhz) input i p3 (dbm) +25c -40c +85c
4 of 9 rfmx1015 ds100827 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . for all graphs: typical performance - low side lo (f rf >f lo ), v cc =5.0v, p lo =0dbm, p rf =0dbm, f if =150mhz, unless otherwise noted. 2r f- 2lo respon se v s. if fr eq (rf= 1950 mhz) -80 -75 -70 -65 -60 -55 -50 -45 -40 -35 -30 50 100 150 200 250 300 if frequency (mhz) 2rf-2lo response (dbc) +25c -40c +85c 3r f- 3lo respon se v s. if fr eq (rf= 1950 mhz) -80 -75 -70 -65 -60 -55 -50 -45 -40 -35 -30 50 100 150 200 250 300 if frequency (mhz) 3rf-3lo response (dbc) +25c -40c +85c rf port return loss vs. rf fr equency -30 -25 -20 -15 -10 -5 0 1.3 1.5 1.7 1.9 2.1 2.3 rf frequency (ghz) rf port return loss (db) +25c -40c +85c lo port re turn loss vs. lo frequency -30 -25 -20 -15 -10 -5 0 1.3 1.5 1.7 1.9 2.1 2.3 lo frequency (ghz) lo port return loss (db) +25c -40c +85c if por t retu rn loss vs . if freq uency -30 -25 -20 -15 -10 -5 0 50 100 150 200 250 300 if frequency (mhz) if port return loss (db) +25c -40c +85c
5 of 9 rfmx1015 ds100827 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . for all graphs: typical performance - low side lo (f rf >f lo ), v cc =5.0v, p lo =0dbm, p rf =0dbm, f if =150mhz, unless otherwise noted. rf-to-if isol ation vs. rf fr equency 20 25 30 35 40 45 50 55 60 1.3 1.5 1.7 1.9 2.1 2.3 rf frequency (ghz) rf-to-if i solation (db) +25c -40c +85c lo leakage at if port vs. rf frequency -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 1.40 1.60 1.80 2.00 2.20 2.40 rf frequency (ghz) lo leakage at i f port (dbm ) +25c -40c +85c current vs. lo frequency (if=150mhz) 150 170 190 210 230 250 1.40 1.60 1.80 2.00 2.20 2.40 lo frequency (ghz) current (ma) +25c -40c +85c
6 of 9 rfmx1015 ds100827 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . for all graphs: typical performance - high side lo (f rf >f lo ), v cc =5.0v, p lo =0dbm, p rf =0dbm, f if =150mhz, unless otherwise noted. conversion gain vs. rf frequency (high side lo) 0 1 2 3 4 5 6 7 8 9 10 1.30 1.50 1.70 1.90 2.10 2.30 rf frequency (ghz) conversion gain (db) +25c -40c +85c gain vs. if freq (rf=1950mhz, high side lo) 0 1 2 3 4 5 6 7 8 9 10 50 100 150 200 250 300 if frequency (mhz) conversion gain (db) +25c -40c +85c gain vs. lo power (rf=1950mhz, l0=2100mhz) 0 1 2 3 4 5 6 7 8 9 10 -3-2-10123 lo power (dbm) conversion gain (db) +25c -40c +85c inpu t ip3 vs. rf frequ ency (high sid e lo) 20 22 24 26 28 30 32 34 1.30 1.50 1.70 1.90 2.10 2.30 rf frequency (mhz) input i p3 (dbm) +25c -40c +85c input p1db v s. rf frequ ency (high si de lo) 4 6 8 10 12 14 16 18 1.30 1.50 1.70 1.90 2.10 2.30 rf frequency (ghz) input p1db (dbm) +25c -40c +85c cu rrent vs. su pply volta ge 150 170 190 210 230 250 4.5 4.7 4.9 5.1 5.3 5.5 supply voltage (v) current (ma) +25c -40c +85c
7 of 9 rfmx1015 ds100827 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . evaluation board schematic evaluation board bill of materials description reference designator manufacturer manufacturer's p/n pcb rfmxx015410(b) cap, 100pf, 5%, 50v, c0g, 0402 c1, c2 murata grm1555c1h101jz01d cap, 1000pf, 10%, 50v, x7r, 0402 c3, c4, c6, c7, c8, c13 murata grm155r71h102ka01e cap, 0.1uf, 10%, 16v, x7r, 0603 c5, c9, c11, c12 murata grm188r71c104ka01d cap, 0.1uf, 10%, 16v, x7r, 0402 c10 murata grm155r71c104ka88d conn, sma, end lnch, mini, flt, 0.062" j1, j2, j3 emerson 142-0741-851 ind, 1500nh, 5%, w/w, 1008 l1, l2 coilcraft 1008cs-152xjbc conn, hdr, st, plrzd, 4-pin, 0.100" p1 itw pancon m pss100-4-c res, 4.32k, 1%, 1/16w, 0402 r1 vishay crcw0402 4k32 1% 100 rt7 2ghz differential if down-converter module u1 rfmd rfmx1015 rfxf2553, welded 350 mhz 1:4 transformer x1 rfmd rfxf2553
8 of 9 rfmx1015 ds100827 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . evaluation board assembly drawing
9 of 9 rfmx1015 ds100827 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . package drawing (dimensions in millimeters) pin function description 1nc no internal connection. can be nc or gnd on the pcb. 2rfin rf single-ended input, external dc block required. 3gnd ground. 4gnd ground. 5gnd ground. 6vcc supply voltage to mixer and lo buffer amplifier. 7nc no internal connection. can be nc or gnd on the pcb. 8nc no internal connection. can be nc or gnd on the pcb. 9nc no internal connection. can be nc or gnd on the pcb. 10 gnd ground. 11 lo local oscillator single-ended input, external dc block required. 12 gnd ground. 13 gnd ground. 14 nc no internal connection. can be nc or gnd on the pcb. 15 nc no internal connection. can be nc or gnd on the pcb. 16 nc no internal connection. can be nc or gnd on the pcb. 17 gnd ground. 18 ifp if differential output and v cc for if amplifier (collector voltage). 19 ifn if differential output and v cc for if amplifier (collector voltage). 20 ifbias if amplifier current control (30ma range) min current: ifbias=0v (~75ma) max current: ifbias=5v (~105ma) current between 75ma to 105ma: ifbias voltage between 0v to 5v.
|
